46” LED Backlit Professional-Grade Large Screen Display

Overview & Features

MODEL: P463

NEC's 46" P463 sets the standard for rugged 24/7 use in the harshest installation environments. LED edge lighting delivers environmental, economic, and aesthetic impact. With a decreased total cost of ownership, a thinner and lighter cabinet, and customizable connectivity options, the P series displays deliver stunning solutions. Everytime. This new generation of display received a full chassis upgrade with the addition of a second expansion slot, faster processing times, evolved daisy chain performance, and near field communication capabilities (for setup and servicing only).

  • Learn more about the P Series products here
  • LED backlighting technology improves power consumption and allows for a slimmer cabinet depth
  • 700cd/m² max brightness combined with full HD resolution will capture the attention of the audience
  • Industrial-strength, premium-grade panel with additional thermal protection, internal temperature sensors with self-diagnostics and fan-based technology, allows for 24/7 operation
  • Input Switching Speedminimizes downtime between source transitions
  • Human Sensor Accessory ensures digital signage is directed at a targeted audience
  • Near field communication capabilities for setup and service
  • Expanded daisy chain options with DP1.2
  • Video daisy chain limitations apply when High-bandwidth Digital Content Protection (HDCP) is utilized
Panel Technology SPVA (P-DID)
Viewable Image Size 46"
Native Resolution 1920 x 1080
Pixel Pitch 0.53mm
Backlight Type LED Edge-lit
Pixels Per Inch 47@ native resolution
Brightness (typical) 550cd/m2
Brightness (maximum) 700cd/m2
Contrast Ratio (typical) 4000:1
Viewing Angle 178° Vert., 178° Hor. (89U/89D/89L/89R) @ CR>10
Response Time(Gray to Gray) 8ms
Refresh Rate 60Hz
Aspect Ratio 16:9
Active Screen Area 40.4 x 22.8 in. / 1025.4 x 578.6mm
Orientation Landscape/Portrait
Displayable Colors More than 16.7 million
Synchronization Range
Horizontal (Analog/Digital) 31.5-91.1 kHz
Vertical 50-85 Hz
Input Signal
Video Analog RGB 0.7 Vp-p/75 Ohms
Sync Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Connectivity
PC Signal Compatibility Yes
Macintosh Compatibility Yes
Input Terminals
Digital DisplayPort, HDMI, DVI-D
Analog VGA 15-pin D-sub
Audio Audio Mini-Jack, DisplayPort Audio, HDMI Audio
External Control RS-232C, LAN, DDC/CI
Output Terminals
Audio Audio Mini-Jack, External Speaker Jack (2)
Digital DisplayPort
External Control RS-232C
Power Consumption (typical)
On 120W
ECO Mode Standby <0.5W
Physical Specifications
Bezel Width (Left/Right, Top/Bottom) 0.6in./0.6in., 0.6in./0.6in. ; 16.5mm/16.5mm, 16.5mm/16.5mm
Dimensions (WxHxD)
Net (with stand) 41.6 x 25.4 x 9.4 in. / 1055.4 x 645.7 x 240mm
Net (without stand) 41.6 x 24.0 x 2.5 in. / 1055.4 x 608.6 x 64.5mm
Shipping 49.6 x 31.0 x 8.9 in. / 1260 x 788 x 225mm
Weight
Net (with stand) 49.2 lbs. / 22.3 kg
Net (without stand) 46.3 lbs. / 21 kg
Shipping 60.3 lbs. / 27.4 kg
VESA Hole Configuration Specifications
400 x 400mm (4-hole)
Environmental Conditions
Operating Temperature 32-122°F / 0-50°C
Operating Humidity 20-80%
Operating Altitude 9843 ft. / 3000m
Storage Temperature -4-140°F / -20-60°C
Storage Humidity 10-90%
Storage Altitude 40,000 ft. / 12,192m\
Limited Warranty (parts & labor, including backlight)
3 years
Additional Features
Advanced thermal capabilities
Advanced cooling system
TileMatrix (10x10)
TileComp
Separate group/Monitor ID function
Ethernet Control and Communication
RS-232 Control and Communication
Carbon footprint meter
Plug and Play (DDC/CI, DDC2B)
Scheduler (w/ real-time clock)
Screen saver function
Optional human sensor
Intelligent Wireless Data (Near Field Communications)
Second expansion slot
Expanded daisy chain (DP 1.2)
6-axis color adjustment
Metal rear cabinet
POP
Side-by-Side
Handles
Variable picture modes
Advanced video settings (Noise Reduction, Adaptive Contrast)
Input labeling
Backlight adjust
Aspect ratio control
Built-in speakers
LED edge-lit backlighting
10-bit color over HDMI
OPS-Compliant slot
Ships With
Power cord
1.8m DVI-D cable
Wireless remote control
Batteries
CD-ROM (user manual)
Option board slot cover
Screws
Thumbscrews
Open Pluggable Specification (OPS)
The first industry-wide standardization in option slots that allows for easier installation, use and maintenance of digital signage
Input Switching Speed
Multiple settings for input switching speed. Select among “normal, quick or super” settings. If multiple sources are used and visible waiting times with black screens would impact viewing, the fast input switching can be convenient and avoid distraction
Advanced Cooling System
Prevents the likeliness of image retention and improves color uniformity.
Interface Extension Slot
A second expansion slot designed to add and customize analog and digital connectivity. This second slot in combination with the OPS expansion slot offer almost unlimited connectivity and player combinations
Improved daisy chain
New P series supports video daisy chaining up to 100 pieces via DisplayPort loop through capabilities. LAN, IR and RS232 can be looped simultaneously via LAN. Fewer cables mean less cost and shorter install times thereby reducing cost overall
Human Sensor Accessory
The human sensor accessory helps deliver creative digital signage to end users by allowing for dynamic control of brightness, audio and source inputs while saving operating costs. It also ensures digital signage is on and directed at a targeted audience
Programmable Gamma
3 Look-Up-Table (LUT) banks allows the new P series to save multiple calibration settings. This improves display flexibility as displays do not have to be recalibrated each time requirements changes. Also useful for rental and staging
Near Field Communications
Reduce installation and servicing costs with the on-board near field communication (NFC) sensor. Use a smart phone with NFC capabilities to preconfigure the display. Configure displays once in the app and then just copy the settings to all displays in the install before they go up. For service, this app can be used to read relevant information such as serial numbers and a log files which can be emailed and analyzed. This makes failure reporting more convenient and less expensive
Proof of Play
Display monitors multiple parameters once command to start proof of play has been issued to the display. 24 hours of monitor data recorded to prove content paid for was shown
Auto Tile Matrix
A set up feature that will save a tremendous amount of time and cost at set up. Auto tile matrix does and auto set up of video wall via DP and LAN daisy chain. Just run auto ID on the first display, choose the number of horizontal and vertical displays, press “SET”
Ingress
a Speed Dome
Cameras
a SDIS Analog
Cameras
a Network
Camera